Description: Juniper srx3k-16ge-tx is an I/O card that provides the users with 16 ports for exchange of standard Ethernet, Fast Ethernet and Gigabit Ethernet traffic. It receives power and communicates with the Switch Fabric Board (SFB) after being attached to the services gateway. Srx3k-16ge-tx is a 16-port Ethernet TX IOC with 16 Gigabit Ethernet RJ45 ports. It has a power requirement of 52 W maximum, weighs 2.4 lb (1.1 kg) and has maximum configurable MTU: 9192 bytes.
|Warranty:||1 year Networking-Hardware Warranty Included|
|Shipping:||Worldwide shipping via DHL, UPS, Fedex, and TNT|
|Repairs:||We offer repair service for the SRX3K-16GE-TX.|
|Exchange:||Exchange credit for your defective unit available.|
To Speak to a sales representative for pricing & lead time:
The Juniper SRX3K-16GE-TX Gigabit Ethernet I/O Module has the capacity to support Fast Ethernet, Ethernet and Gigabit Ethernet traffic through copper media. As it is inserted horizontally into the services gateway, the device is designed to communicate with Switch Fabric Board (SFB) to receive power. Along with the RJ-45 connectors, the Ethernet I/O Module also features LED’s on the IOC which indicate connectivity and port status.
Featuring 16-port Ethernet TX IOC design pattern, SRX3K-16GE-TX module features 16 Gigabit Ethernet RJ45 ports along with a network processing unit (NPU). The Services Processing Cards (SPCs) deliver the processing power to operate services such as IPsec, Firewall and IDP. With a maximum configurable MTU value of 9293 bytes, the device needs a minimum power of 52W to operate normally. The overall weight is 2.4lbs and is absolutely easy to connect.
The available software for SRX3400 and SR3600 processors is Junos OS Release 9.3 and later versions for which users must follow the installation guide included in the packaging. For the SRX1400 processor, the supporting software is Junos OS Release 10.2 and later versions.
Cables and Connectors
To enable gigabit ethernet services properly, sixteen RJ-45 connectors for 10/100/1000 Mbps Ethernet are required.
For the SRX3K-16GE-TX Gigabit Ethernet I/O Module, the supported slots include SRX1400, SRX3400 and SRX3600. For the SRX1400 processor, front slot is labeled 2 whereas the SRX3400 processor features front slots labeled 1-4. Lastly, the SRX3600 processor has front slots labeled 1-4 for which extra information is available in the Junos OS documentation.
Swapping and Controls
The SRX3K-16GE-TX IOC supports cold-swap only modules. Before adding, replacing or removing the IOCs, it is recommended that the services gateway must be powered off in order to avoid any type of malfunction.
The changing color of LED indicates working status of the Gigabit Ethernet I/O module. When the Service LED, one bicolor is turned off, the IOC is powered off but mapped to the NPC whereas the Green light indicates that the module is mapped to the NPC and is ready to carry Ethernet traffic. Amber color shows that the IOC is not mapped to the NOC and is not yet ready to carry Ethernet traffic.
OK/FAIL LED, one bicolor when turned off shows that the services gateway is not turned or is yet to be configured for chassis clustering. Furthermore, Steady green color indicates that the services gateway is being configured for chassis clustering along with a normal SCM operation. The blinking green LED shows that the SCM is initializing and is ready to go offline whereas the Red color indicates that the service gateway is not operating normally or has failed.
For the benefit of our valuable visitors, we have now introduced the Juniper SRX3K-16GE-TX Ethernet I/O module with discounts up to 75 percent as compared to the official Juniper price list. Moreover, one-year manufacturers warranty is also provided along with the relevant configuration guides and datasheets (PDF) at our website.