About
About SPIDER-SL-44-05T1O69999TY9HHHH
The SPIDER-SL-44-05T1O69999TY9HHHH switch is an unmanaged Ethernet rail switch that has been designed as a full gigabit Ethernet transmitter with 4 PoE+ ports. This standard rail switch has been included in the SPIDER III series of switches that are manufactured by Hirschmann Automation. This switch comes with an enclosure that has been designed to allow it to operate in harsh environments. Besides the enclosure, this switch comes with a terminal block with a 4-pin connector. Through this terminal block, the voltage is transmitted to the switch. Both the Hirschmann Automation SPIDER-SL-44-05T1O69999TY9HHHH unmanaged Ethernet rail switch and the terminal block that is shipped with it are intended to be mounted on a DIN Rail. Both of these devices come with plug-in mechanisms that make it unnecessary to use special tools during the installation and start-up process.
The Hirschmann Automation SPIDER-SL-44-05T1O69999TY9HHHH unmanaged Ethernet rail switch operates with different network types such as the twisted pair, multimode fiber, and single-mode fiber networks. The length of cable that it can cover will depend on this network. For twisted-pair cable networks, it will cover up to 100 meters, for multimode fiber networks, it will cover lengths from 275 to 550 meters depending on the link budget that is used, and for single-mode fiber networks, it will cover up to 20 kilometers if it is using an 11 dB link budget. It is recommended to install the Hirschmann Automation SPIDER-SL-44-05T1O69999TY9HHHH unmanaged Ethernet rail switch in controlled environments where the temperature range is from -40 to 70 degrees Celsius and the relative humidity range is between 0 and 95 percent with no condensation. The switch comes with a metal housing that enables it to operate safely in these conditions. It is not recommended to install the switch in an environment with corrosive materials.
