The Hirschmann SPIDER-SL-20-04T1M29999TY9HHHH switch is an unmanaged Ethernet switch. It requires 12/24 Volts DC input. The maximum current draw of the SPIDER-SL-20-04T1M29999TY9HHHH switch is 100 milliamps.

Available Now 
Warranty: 1 year Networking-Hardware Warranty Included
Shipping: Worldwide shipping via DHL, UPS, Fedex, and TNT
Repairs: We offer repair service for the SPIDER-SL-20-04T1M29999TY9HHHH.
Exchange: Exchange credit for your defective unit available.

Request a Quote

Add more parts to quote
 Rated 4.8 with 14 reviews

Speak Now

To Speak to a sales representative for pricing & lead time:





About SPIDER-SL-20-04T1M29999TY9HHHH

The Hirschmann SPIDER-SL-20-04T1M29999TY9HHHH switch is an unmanaged industrial network switch. It is designed for mounting on a DIN Rail and it is powered from a DC voltage supply. The SPIDER-SL-20-04T1M29999TY9HHHH switch does not support dual or redundant DC input. The maximum current consumption rating is 100 milliamps at 24 Volts DC. The nominal operating voltage is 12/24 Volts DC and the operating voltage range is 9.6 to 32 Volts DC. The SPIDER-SL-20-04T1M29999TY9HHHH switch draws a maximum of 2.4 Watts of power during operation and it dissipates 8.3 BTU per hour as heat. The switch is designed for extended operating temperatures ranging from -40 to 70 degrees Celsius. During storage, the switch should be protected against strong vibrations. The temperature range for device storage is from -40 to 80 degrees Celsius.


The MTBF rating for the Hirschmann SPIDER-SL-20-04T1M29999TY9HHHH unmanaged switch is 2,282,902 hours, which equates to approximately 260 years. The housing of the SPIDER-SL-20-04T1M29999TY9HHHH switch is made of plastic and it is designed for indoor use. The environmental protection rating of the switch housing is IP 30. The weight of the switch is approximately 120 grams and the dimensions are 26 x 102 x 70 millimeters (without the power terminal block). The 5 total available network ports on the SPIDER-SL-20-04T1M29999TY9HHHH switch include one 100 BASE-FX port and four 10/100 BASE-TX ports. The copper ports support auto-crossing and auto-negotiation. The fiber port is designed for use with a multi-mode fiber cable for up to 5000-meter link distances. The switch is available in a fanless design. The packet switching technology supported by the switch is the store and forward technology. All installation and operation-related activities should be performed by trained technicians only.


Technical specifications


Unmanaged Switches


Ethernet Switch


DIN Rail

12/24 Volts DC

100 miliamps

2.4 Watts

8.3 BTU per hour


120 grams

26 x 102 x 70 millimeters


Common misspellings:

Common misspellings: