About
About RSR20-0800T1T1T1SKKHPHH
The RSR20-0800T1T1T1SKKHPHH managed switch is an Ethernet switch that has been designed by Hirschmann Automation and intended for industrial applications that require an Ethernet network to fulfill their functions. This switch has been designed to operate in harsh environments where conditions are far harsher than in standard environments. It comes with an IP 30 rated protective housing that protects it against contact with external particles that might impede the correct functioning of the switch. This switch operates without the use of fans and it can be used with a TP-link with a communication distance of up to 100 meters. The Hirschmann Automation RSR20-0800T1T1T1SKKHPHH managed Ethernet switch has been designed to operate as a standard managed DIN Rail switch that does not have Gigabit Ethernet ports. This switch only provides Fast Ethernet ports. It comes with 8 ports in total that can each provide a data transfer rate of 100 Mbits per second. This switch operates with twisted pair cables that are connected through RJ45 sockets in the ports.
The Hirschmann Automation RSR20-0800T1T1T1SKKHPHH managed Ethernet switch can operate with a standard temperature range that goes from 0 to 60 degrees Celsius and it can operate with both AC and DC voltage. The AC operating voltage range goes from 110 to 230 Volts AC with a frequency range of 47 to 63 Hertz. For DC power, the voltage range goes from 48 to 320 Volts DC, including the maximum voltage tolerances. The Hirschmann Automation RSR20-0800T1T1T1SKKHPHH managed Ethernet switch comes with a professional Hirschmann software variant that can be used to configure and manage the switch easily. The RSR20-0800T1T1T1SKKHPHH managed Ethernet switch can be snapped securely onto a DIN Rail for easy mounting. It is important to maintain the recommended clearances on each side of the switch to help it to ventilate properly and avoid overheating.
