About
About RS20-0800M2M2TDAP
The Hirschmann RS20-0800M2M2TDAP switch is an RS20 series managed Fast Ethernet switch for DIN Rail mounting. It supports the store and forward switching modes. The RS20-0800M2M2TDAP managed switch does not have a cooling fan. The software on the switch is Layer 2 professional software which supports a wide range of configurable options for the redundancy, management, diagnostics, switching, security, and timing settings. The RS20-0800M2M2TDAP managed switch can run on either DC or AC input and the range for AC input is 18 to 30 Volts AC and the range for DC input is 9.6 to 60 Volts DC. The maximum rated power draw of the RS20-0800M2M2TDAP managed switch is 7.7 Watts. The switch is designed for an extended operating temperature range which is -40 to 70 degrees Celsius. The approximate weight and dimensions of the RS20-0800M2M2TDAP managed switch are 410 grams and 74 x 131 x 111 millimeters, respectively.
The Hirschmann RS20-0800M2M2TDAP managed switch has a total of 8 ports: 6 are standard 10/100 BASE TX network ports and the remaining 2 are 100 BASE FX ports which can be used with multimode fiber cables. Ports 1 to 6 on the switch support twisted pair cables with 100-meter maximum lengths. The fiber uplink ports support 5000-meter maximum communication distances with 1300-nanometer wavelengths and 50/125 micrometer fiber ratings, and 4000-meter maximum distances with 1300-nanometer optical wavelengths and 65/125 micrometer fiber ratings. When the RS20-0800M2M2TDAP managed switch is installed on a ship, the open rail mounting kit can be ordered so it can be mounted in a way that avoids excessive resonance. The switch is meant to be mounted on a vertical and flat surface through the use of a wall-mounting plate. The installation of the RS20-0800M2M2TDAP managed switch should be performed by trained technicians.
