The BRS20-8TX/2FX-SM-EEC switch is a TSN-enabled industrial switch. It has been manufactured by Hirschmann. This switch is a managed switch that needs to be configured before use, but it is easy to configure and install.

Available Now 
Warranty: 1 year Networking-Hardware Warranty Included
Shipping: Worldwide shipping via DHL, UPS, Fedex, and TNT
Repairs: We offer repair service for the BRS20-8TX/2FX-SM-EEC.
Exchange: Exchange credit for your defective unit available.

Request a Quote

Add more parts to quote
 Rated 4.8 with 10 reviews

Speak Now

To Speak to a sales representative for pricing & lead time:





About BRS20-8TX/2FX-SM-EEC

The BRS20-8TX/2FX-SM-EEC managed switch is a Bobcat series industrial switch manufactured by Hirschmann. It has a voltage rating of 12/24 Volts DC. This managed switch is used for real-time TSN Ethernet support with accurate data transmission. The switch comes with advanced security features and it offers wire speed access control and automatic DDOS protection. The switch has a fanless design and offers fast Ethernet speed. The BRS20-8TX/2FX-SM-EEC switch is equipped with a 6-pin terminal block for the power supply and signaling contact and another 2-pin terminal block for the digital input. The switch can be enclosed inside an IP 30 rated enclosure for both indoor and outdoor use. It should not be exposed to sources of high heat and excessive EMC noise. The operating temperature should always be between -40 and 70 degrees Celsius in a relatively humid environment with no condensation. The switch has been certified with the CE, FCC, and other standards.


The Hirschmann BRS20-8TX/2FX-SM-EEC Bobcat series managed switch features manual cable crossing and port power down features. The switch has a fanless design and it is compact in size. This compact switch allows expanded bandwidth capabilities and it can easily adjust SFPs and support different network speeds. A USB Type C port is present on the front side of the switch for local management and for device replacement. The BRS20-8TX/2FX-SM-EEC managed switch supports independent VLAN learning, static/multicast address entries, flow control, and other advanced features.  The BRS20-8TX/2FX-SM-EEC managed switch must be configured before use, but the configuration and installation processes are simple. The switch has dimensions of 73 millimeters x 138 millimeters x 115 millimeters. It has EMC interference immunity for protection against electrostatic discharge, electromagnetic fields, fast transients, and voltage surges.


Technical specifications


Managed Switches


Industrial Switch

12/24 Volts DC

8 Watts

27 BTU per Hour as Heat



-40 to 70 degrees Celsius

IP 30


Common misspellings:

Common misspellings: