OZD Profi 12M P12 PRO


The OZD Profi 12M P12 PRO FiberINTERFACES Optical Repeater Module is specifically designed for the PROFIBUS-field bus networks by Hirschmann. It comes with a plastic housing and galvanic isolation. The module's operating voltage range is 18 to 32 Volts DC, and it has a power consumption rating of 4.8 Watts.

Available Now 
Warranty: 1 year Networking-Hardware Warranty Included
Shipping: Worldwide shipping via DHL, UPS, Fedex, and TNT
Repairs: We offer repair service for the OZD Profi 12M P12 PRO.
Exchange: Exchange credit for your defective unit available.

Request a Quote

Add more parts to quote
 Rated 4.9 with 20 reviews

Speak Now

To Speak to a sales representative for pricing & lead time:





About OZD Profi 12M P12 PRO

The OZD Profi 12M P12 PRO Repeater Module is an optical repeater module manufactured by Hirschmann in the FiberINTERFACES series. It is used to perform the signal conversion between electrical to optical signals and the reverse conversion as well. The OZD Profi 12M P12 PRO Repeater Module can be used in optical PROFIBUS fieldbus networks. Each optical port contains one measuring output. Some of the features of the module include redundant ring support, mutually independent ports, a redundant feed, a female 9-pole Sub-D socket, BFOC connectors, and multicolored indicator LEDs. It provides malfunction reports as an accumulative signal through the signaling contacts. The OZD Profi 12M P12 PRO Repeater Module is equipped with a metal housing that can be mounted on a mounting plate.


The OZD Profi 12M P12 PRO Repeater Module has dimensions of 35 x 156 x 119 millimeters and a weight of 200 grams. Its optical interface provides 660 nanometers of wavelength. It has the C-Tick approval rating and it meets industrial standards. The input voltage range of the module is -7 to 12 Volts DC. Its electrical interface does not have galvanic isolation. It has a maximum current consumption rating of 200 milliamps. This module is provided with 4 optical BFOC ST plugs. The housing material of the OZD Profi 12M P12 Repeater Module is plastic. It allows for the measuring of optical input levels by using a conventional voltmeter. It has multicolored LEDs for indicating the operating status of the module and possible malfunctions. This module is specifically designed to install in a DIN Rail. It is recommended to seal the unused BFOC sockets with protective caps. Make sure to refer to the technical data when selecting the maximum length of the fiber optic cables and the fiber type.


Technical specifications



OZD Profi 12M P12 PRO


-7 to 12 Volts DC

18 to 32 Volts DC


4.8 Watts

0 to 60 degrees Celsius

35mm x 156mm x 119mm

200 grams


DIN Rail

IP 20


Common misspellings:

Common misspellings:
0ZD Profi 12M P12 PRO
OZD Pr0fi 12M P12 PRO
OZD Profi l2M P12 PRO
OZD Profi 12M Pl2 PRO
OZD Profi 12M P12 PR0
OZD Profi 12M P12 PROX