Products

WS-C2960XR-24PS-I

Description:  This switch from the Cisco 2960-XR series is stackable with 24 Ethernet interfaces. It operates on the Cisco IOS IP Lite software and has a power rating of 0.46KVA with a measured power consumption of 36.5W for zero traffic and 43.4 for 100% traffic. It measures 1.75 x 16.0 x 17.5inches and weighs 13.7 pounds.

Available Now 
Warranty: 1 year Networking-Hardware Warranty Included
Shipping: Worldwide shipping via DHL, UPS, Fedex, and TNT
Repairs: We offer repair service for the WS-C2960XR-24PS-I.
Exchange: Exchange credit for your defective unit available.

Request a Quote

Add more parts to quote
 Rated 5 with 1 reviews

Speak Now

To Speak to a sales representative for pricing & lead time:

Phone

1-919-443-0207

Email

sales@Networking-Hardware.com

About

About WS-C2960XR-24PS-I

Product Overview

The Cisco WS-C2960XR-24PS-I Catalyst Series switch is powered with 24 10/100/1000 Ethernet interfaces which operates on IP Lite Cisco IOS software for all SKUs. Stackable with both FlexStack-Plus and FlexStack Extended supports, the switch is designed to automatically configure either the LAN Base, Lan Lite or IP Lite feature set. Moreover, WS-C2960XR-24PS-I has predefined POE+ and 4SPF uplink interfaces which allows users to configure and control switch settings with ease.

Power Supply

The Cisco WS-C2960XR-24PS-I is launched with multiple power supply support for uninterrupted operation. One fixed power supply is included in the packaging whereas an external redundant power supply can also be purchased separately.

Power Capacity

The switch delivers 370W PoE power along with second FRU power supply option of up to 640W. For optimum performance, the device requires a nominal voltage of AV 12/230 V along with a 50/60 Hz frequency. Furthermore, power input is controlled through Redundant Power System (RPS) connector which keeps the switch safe and secure.

Configuration

WS-C2960XR-24PS-I Catalyst Switch can be configured through IP Lite Cisco IOS Software image for which 640WAC power supply is required. The available 24 Ethernet ports operating on 4 SFP Uplink Interfaces also support SFP compatibility for which the installation guide can be consulted to complete the procedure.

Stacking

Stackable via both Cisco FlexStack-Plus and FlexStack Extendable, up to eight switches can be easily stacked at once. Stack bandwidth for FlexStack-Plus is set to 80Gbps whereas FlexStack-Extended delivers 40 Gbps as both of them have a stack limit of 8. To avoid any problems, allow the switch to automatically upgrade over the Stack’s Cisco IOS Software version and feature set.

Tech Specifications

Cisco catalyst C2960X series is engineered to provide high end performance and reliable operation. With Uplink interfaces extending up to 4 x 1G SFG, the networking switch provides 80G stack bandwidth along with an impressive switching bandwidth of 216Gbps. Talking about other hardware specifications, WS-C2960XR-24PS-I now has a 512MB RAM capacity combined with 128MB flash memory which allows fast and reliable operation. The rack mountable dimensions are set to 4.45 x 0.8 x 44.5 cm with an overall weight of 16.15 Kg.

Tech Support and Services

Instant help and support for WS-C2960XR-24PS-I catalyst switch can be availed upon a separate purchase of Cisco SmartNet service.

Additional Information

Cisco WS-C2960XR-24PS-I Catalyst Series Switch now comes with a detailed installation guide and service manual. As the product is eligible for End of Life (EOL) and End of Sale (EOS) limited warranty, customers can also download the detailed datasheet pdf from our website for further learning. Moreover, we have facilitated out valued customers by delivering the Cisco Catalyst WS-C2960XR-24PS-I series switch on 70% off as of the original Cisco list price. For installation guide and extended support, please visit our website where new parts are also available at discounted rates.

specifications

Technical specifications

128 MB

places switch in very-low power mode during intervals of non-operation

enables single-line Command-Line Interface (CLI)

next gen. for flow visibility technology

12 ports up to 30W

Yes

Yes

16,000

Up to eight per port

Cisco EtherChannel technology across diverse members of the stack

validate on different VLANs

WS-C2960XR-24PS-I

1.75 x 16.0 x 17.5

-5ºC to 45ºC

10BASE-T ports: RJ-45 connectors, 2-pair Category 3, 4, or 5 Unshielded Twisted-Pair (UTP) cabling

90 VAC to 264 VAC

36.5

APM86392 600MHz dual core

ports dynamically identify idle periods

a boot server simplifies switch deployment

network metadata held in a DNS server

24 ports up to 15.4 W

40G

Yes

4000

scheduling

convergence time under 100 milliseconds

security and policy enforcement

2960XR

4.45 x 40.8 x 44.5

Up to 3000 m

Per-port status: Link integrity, disabled, activity, speed, and full duplex

6A to 3A

43.2

USB (Type-B), Ethernet (RJ-45)

moderate the power consumed via PoE-powered endpoints

all switches are automatically upgraded to new software version

hard-binding with the end device and the interface

370 W

8

80G

1250

 congestion avoidance

allow rapid spanning-tree convergence

control admission to the network

Cisco

13.7

Up to 4000 m

CAB-STK-E-0.5M stacking cable with a 0.5 m length

50 Hz to 60 Hz

43.4

USB (Type-A) for external flash storage

automatically chooses half- or full-duplex transmission mode

automated IOS Software image installation and configuration

8

4000

up to 256 aggregate

reconvergence for per-VLAN spanning-tree basis

enhances Layer-2 and Layer-3 network access

IP Lite

6.2

10% to 95% noncondensing

CAB-CONSOLE-RJ45 Console cable 6 ft. with RJ-52

0.46 KVA

43.2

10/100 Mbps Ethernet (RJ-45)

dynamic trunk configuration via all switch ports

automated configuration of switch ports

1250

classification on a per-packet basis

automatically tries to reactivate a link

 enable seamless multipurpose device profiles

4 SFP

10% to 95% noncondensing

  The internal PS is an auto-ranging unit & tolerates input voltages between 100 and 240V AC

108 Gbps

automates the installation of Cisco Fast EtherChannel

automatic configuration of QoS

1000

an external RPS

allows the switch to undergo IOS integrity checks

370 Watts

321290

216 Gbps

Ethernet channeling

1000

Port Security Dynamic ARP Inspection & IP Source Guard

24

1023

adjusts transmit & receive pairs if incorrect cable type 

500

controls traffic between hosts in a common segment

80 Gbps

4096

 incorrect fiber-optic wiring detected and disabled

250

solves problems caused by malformed or forged (spoofed) IP

8

9198. bytes.

 maximize memory allocation

1000

enables an IP phone / PC to authenticate on the same switch port

71.4 Mpps

9216. bytes

 minimize broadcasts and maximize bandwidth

500

security & QoS ACEs

216 Gbps

allows VLAN1 to be disabled

allows for network security by encrypting administrator traffic

128 MB

71.4 Mpps

fast client joins and departures of multicast streams

simplifies centralized control of the switch

13.7

 isolate the streams from subscriber VLANs for bandwidth and security

administrators informed of users added to or removed

1.75 x 16.0 x 17.5

prevents faulty end stations

prevents unauthorized users from changing the switch configuration

IP Lite

simplifies telephony installations

avoid mistaken topology loops

supports dynamic VLANs

prevents uncontrolled edge devices from developing Spanning Tree Protocol root nodes.

 administrators remotely check ports via Layer 2 switch

facilitates multicast authentication

simplifies troubleshooting

lowers the price of administering software upgrades

correct and reliable timestamp

MISSPELLINGS

Common misspellings:


Common misspellings:
WS-C296oXR-24PS-I
WS-C2960XR-2APS-I
WS-C2960XR-24PS-IX