Products

WS-C2960X-48TS-LL

Description:  The Cisco Catalyst 2960X-48TS-LL is a cisco switch which is fixed configured and stackable (both flex stack extended and plus compatible). The switch uplink interfaces are 2 x SFP and has 48 ports of ethernet. The IOS cisco software image is LAN Lite.

Available Now 
Warranty: 1 year Networking-Hardware Warranty Included
Shipping: Worldwide shipping via DHL, UPS, Fedex, and TNT
Repairs: We offer repair service for the WS-C2960X-48TS-LL.
Exchange: Exchange credit for your defective unit available.

Request a Quote

Add more parts to quote
 Rated 5 with 1 reviews

Speak Now

To Speak to a sales representative for pricing & lead time:

Phone

1-919-443-0207

Email

sales@Networking-Hardware.com

About

About WS-C2960X-48TS-LL

Product Overview

The WS-C2960X-24TS-LL is a fixed configuration, stackable Gigabit Ethernet switch. It provides not only easy device onboarding and configuration but also reliable monitoring and troubleshooting.

Switch Models and Configurations

As the name suggests, this switch only consists of 24 Ethernet ports with 2 SFP Uplink Interfaces. Additionally, it incorporates the Cisco LAN Lite software. The FlexStack-Plus and the FlexStack-Extended capability are not included in this switch.

Stacking

Stacking is not possible with the Cisco LAN Lite software.

Technical Specifications

The hardware of the WS-C2960X-24TS-LL features a 256MB DRAM and a 64MB Flash memory. It also has a 600MHz dual core CPU. It can support a maximum of 64 active VLANs. The forwarding bandwidth goes up to 50 Gbps while switching bandwidth up to 100 Gbps. It has 9198 bytes Maximum Transmission Unit and a 9216 bytes Ethernet frame, along with a forwarding performance that stands at 68.5 Mpps. There are in total 4096 VLAN IDs available.

Mechanical Specifications

The WS-C2960X-24TS-LL is comparatively less in weight at 3.7 kg or 8.2 lbs. Its size, however, is about the same as other 2960X series switches at dimensions of 1.75 x 11.0 x 17.5 inches or 4.5 x 27.9 x 44.5 cm.

Power

The WS-C2960X-24TS-LL has a maximum consumption power rating of 0.035KVA. It operates in the range of 1A to 0.5A at a voltage range of 100 – 240 VAC and a frequency range of 50-60 Hz. As far as the power consumption is concerned, this switch consumes an average of 32.0 W. For no traffic, the power consumption stands at 25.2 W.

There are also a few redundant power supply options available with the -C2960X-24TS-LL. These include the Cisco Redundant Power System 2300 as well as the RPS 2300 750W AC power supply.

Extras Section

The WS-C2960X-24TS-LL end of life (eol) and end of sale (eos) announcements have not yet been announced. This switch is available with over 50% discount on the Cisco gpl (global list price) in our store.

specifications

Technical specifications

WS-C2960X-48TS-LL

validate on different VLANs

Cisco EtherChannel technology across diverse members of the stack

Up to eight per port

16,000

Yes

next gen. for flow visibility technology

enables single-line Command-Line Interface (CLI)

places switch in very-low power mode during intervals of non-operation

256 MB

1.75 x 11.0 x 17.5

-5ºC to 45ºC

10BASE-T ports: RJ-45 connectors, 2-pair Category 3, 4, or 5 Unshielded Twisted-Pair (UTP) cabling

111 to 240 VAC

31.4

2960X

APM86392 600MHz dual core

security and policy enforcement

convergence time under 100 milliseconds

scheduling

320

network metadata held in a DNS server

a boot server simplifies switch deployment

ports dynamically identify idle periods

APM86392 600MHz dual core

4.5 x 27.9 x 44.5

Up to 3000 m

Per-port status: Link integrity, disabled, activity, speed, and full duplex

61 to 60 Hz

44.3

Cisco

control admission to the network

allow rapid spanning-tree convergence

 congestion avoidance

32

hard-binding with the end device and the interface

all switches are automatically upgraded to new software version

moderate the power consumed via PoE-powered endpoints

USB (Type-B), Ethernet (RJ-45)

8.9 lb

Up to 4000 m

CAB-STK-E-0.5M stacking cable with a 0.5 m length

1A - 0.5A

44.5

LAN Lite

enhances Layer-2 and Layer-3 network access

reconvergence for per-VLAN spanning-tree basis

up to 256 aggregate

256

automated IOS Software image installation and configuration

automatically chooses half- or full-duplex transmission mode

USB (Type-A) for external flash storage

4.0 kg

10% to 95% noncondensing

CAB-CONSOLE-RJ45 Console cable 6 ft. with RJ-56

0.46KVA

44.4

2 SFP

 enable seamless multipurpose device profiles

automatically tries to reactivate a link

classification on a per-packet basis

0

automated configuration of switch ports

dynamic trunk configuration via all switch ports

216Gbps

10% to 95% noncondensing

  The internal PS is an auto-ranging unit & tolerates input voltages between 100 and 240V AC

48

allows the switch to undergo IOS integrity checks

an external RPS

1000

automatic configuration of QoS

automates the installation of Cisco Fast EtherChannel

1023

476560

104.2 Mpps

Port Security Dynamic ARP Inspection & IP Source Guard

1000

Ethernet channeling

4096

216Gbps

9198. bytes.

controls traffic between hosts in a common segment

384

adjusts transmit & receive pairs if incorrect cable type 

9198. bytes.

256 MB

solves problems caused by malformed or forged (spoofed) IP

256

 incorrect fiber-optic wiring detected and disabled

9216. bytes

8.9 lb

enables an IP phone / PC to authenticate on the same switch port

256

 maximize memory allocation

104.2 Mpps

security & QoS ACEs

256

 minimize broadcasts and maximize bandwidth

allows for network security by encrypting administrator traffic

allows VLAN1 to be disabled

simplifies centralized control of the switch

fast client joins and departures of multicast streams

administrators informed of users added to or removed

 isolate the streams from subscriber VLANs for bandwidth and security

prevents unauthorized users from changing the switch configuration

prevents faulty end stations

avoid mistaken topology loops

simplifies telephony installations

prevents uncontrolled edge devices from developing Spanning Tree Protocol root nodes.

supports dynamic VLANs

facilitates multicast authentication

 administrators remotely check ports via Layer 2 switch

simplifies troubleshooting

lowers the price of administering software upgrades

correct and reliable timestamp

MISSPELLINGS

Common misspellings:


Common misspellings:
WS-C296oX-48TS-LL
WS-C2960X-A8TS-LL
WS-C2960X-4bTS-LL
WS-C2960X-48TS-1L
WS-C2960X-48TS-L1
WS-C2960X-48TS-LLX