Rated 5 with 1 reviews


Description:   The Cisco WS-C3560X-48PF-L LAN Base contains 48 PoE+ Total Ethernet Ports, a 1100W AC Power Supply, and a 160 Gbps Switching Fabric. The WS-C3560X-48PF-L operates with 256 MB DRAM and 64 MB Flash.

Available Now 

Request a quote for WS-C3560X-48PF-L
Warranty: 1 year Networking-Hardware Warranty Included
Shipping: Worldwide shipping via DHL, UPS, Fedex, and TNT
Repairs: We offer repair service for the WS-C3560X-48PF-L.
Exchange: Exchange credit for your defective unit available.

To Speak to a sales representative for pricing & lead time:



About WS-C3560X-48PF-L

Product Overview

WS-C3560X-48PF-L switch has 48 Gigabit Ethernet ports. It is a separate switch with PoE+ ports in LAN Base selection. It has a redundant power supply with MAC hardware based security. The switch is typically deployed in enterprises as a Layer 2 only or a multi-layer switch.



Cisco 3560-X has 48 Power over Ethernet ports. There are 4 uplinks. The switch provisions StackWise technology allows multiple switches to be stacked one on top of another using cisco’s proprietary stack cables. Up to 9 switches can be stacked using this technology which increases the switch capabilities. The management is easy through the use of a single management IP address, auto-configuration.  One master switch is selected per stack. The slave switches are able to copy the iOS running on the master switch. A total of 1005 VLANs can be configured in the switch.


Power and Weight


WS-C3560X-48PF-L has a redundant power supply capacity built-in. It has a default power supply which is, C3KX-PWR 715 WAC and 435W of available PoE Power.


Hardware Specifications


The LED lights in the switch is capable of showing all the device related statuses, such as power supply status and port status (speed, duplex). This device is pre-installed with Cisco’s iOS LAN Based. The maximum Flash of 64 MB is accessible.



Features and Benefits


The traffic in the switch can be separated into different broadcast domains by the use of VLAN (Virtual Local Area Network) technology.

The switch offers Ether Channel links to be made for redundancy and throughput with the assistance of link aggregation protocols such as PAgP and LACP.  DHCP is a protocol which can be deployed in the network to provide automatic assignment of IP addresses to all the network devices. This feature is supported in the switch. The switch also supports layer 3 routing protocols along with multicast packet forwarding features. HSRP and VRRP are commonly deployed in the networks to provide redundancy in case of a switch failure. Both HSRP and VRRP are supported by the switch.


Additional Information

Cisco‘s Technical Assistance Center offers support on Cisco products; Service with configuring, troubleshooting switch’s software and hardware related issues. Cisco’s SmartNet Contract (purchased independently) bids 24/7 Technical support for all Cisco products. Up to 75 % of discount can be issued if the Cisco Catalyst switch is purchased through our website.



1) https://www.cisco.com/c/en/us/products/collateral/switches/catalyst-3560-x-series-switches/data_sheet_c78-584733.html?referring_site=RE&pos=1&page=https://www.cisco.com/c/en/us/products/collateral/switches/catalyst-3750-x-series-switches/product_bulletin_c25-578934.html


Technical specifications:

Part NumberWS-C3560X-48PF-L
Product TypeLAN Base
SeriesCatalyst 3750x
Total Ethernet Ports48 PoE+
AC Power Supply1100W
Switching Fabric160 Gbps
Flash64 MB
Total VLANs1005
Forwarding Rate101.2 mpps
Dimensions1.75 x 17.5 x 19.5
Weight7.5 kg
Input Current10-5 A
Output Rating-56V@19.64A
Revision Part #

Common misspellings: