Description: The Cisco WS-C3560X-48PF-E IP Services contains 48 PoE+ Total Ethernet Ports, a 1100W AC Power Supply, and a 160 Gbps Switching Fabric. The WS-C3560X-48PF-E operates with 256 MB DRAM and 64 MB Flash.
|Warranty:||1 year Networking-Hardware Warranty Included|
|Shipping:||Worldwide shipping via DHL, UPS, Fedex, and TNT|
|Repairs:||We offer repair service for the WS-C3560X-48PF-E.|
|Exchange:||Exchange credit for your defective unit available.|
To Speak to a sales representative for pricing & lead time:
Among all the Cisco® Catalyst® 3560-X Series Switches, the WS-C3560X-48PF-E standalone switch is one of the best selling.
Security, availability and energy efficiency are three features that extol this switch. Optional network modules (ONM), IEEE 802.3at PoE configuration, MACsec and redundant power supply (RPS) are 4 of the most prominent features of WS-C3560X-48PF-E smartnet. The WS-C3560X-48PF-E specification list presents this switch to be EEE supported and 48 10/100/1000 UPOE compatible. 4 in total uplink network modules (optional) with modular power supply (dual redundant) and fans are present in this Cisco® Catalyst® 3560-X switch.
For hardware encryption, WS-C3560X-48PF-E datasheet trusts on Media Access Control Security, by far the best of the lot. For routed access, the Open Shortest Path First technology has been used for IP based images. Hardware Encryption (switch-to-switch) and Flexible NetFlow are two more features of Cisco® Catalyst® WS-C3560X-48PF-E datasheet that connects with the Service Module uplink. In this series, operational cost and utmost minimization of it has been prioritized very much. Enhanced Cisco EnergyWise technology is the technology used for that in this WS-C3560X-48PF-E standalone switch.
In the WS-C3560X-48PF-E standalone switch, there is 48 PoE+ total of 10/100/1000 Ethernet Ports, 1100W of Default AC Power Supply and 800W of Available PoE Power.
The WS-C3560X-48PF-E smartnet primarily runs on advanced 3 layer switching of IP services (IPv4 and IPv6) for full enterprise services. OSPF (Open Shortest Path First) EIGRP (Enhanced Interior Gateway Routing Protocol) and PIM (Protocol Independent Multicast) and OSPFv3 and EIGRPv6 routing are the main features under this category.
FNF feature (Flexible Netflow) has been used custom dedicated hardware here for enhanced security and borderless user experience. For MACSec, the Cisco WS-C3560X-48PF-E end of life also maintains a dedicated hardware system. With this distinct parallel 2 software systems, there is no room packet forwarding latency and performance.
The Flexible NetFlow and Security Anomaly Detection come with three sub-technologies: simultaneous flows (32,000), simultaneous active monitors (128) and Supported version: 9.
Cisco WS-C3560X-48PF-E IP service is empowered with Total 48 PoE+ 10/100/1000 Ethernet Ports, 800W of Available PoE Power and 1100W of Default AC Power Supply.
Borderless high-end security, Sustainability, easy-operations and enhanced user-experience are 4 points why the buyers love this Cisco® Catalyst® 3560-X series switches so much. Cisco EnergyWise technology and intelligent power management along with efficient switch operation system and Energy Efficient Ethernet are the columns of sustainability. Intelligent PoE Management is an umbrella of small technologies to be précised. ‘Per port PoE power sensing’, ‘Cisco Discovery Protocol Version 2’ ‘The PoE MIB’ and ‘per port power consumption’ are 4 sub-features that works with Cisco Aironet WLAN a/p and Cisco IP phones.
Cisco® Catalyst® smart operation helps the Cisco WS-C3560X-48PF-E users with ease of operation and smart network management. ‘Cisco plug and play Smart Install’, ‘RSPAN) ‘Cisco automatic configuration Auto Smartports’ MVR (Multicast VLAN Registration) and EEM (Embedded Event Manager) are few of the features that you will find in Cisco WS-C3560X-48PF-E user manual for better customer experience and better adaptation.
Why we always say any other switch can barely compete with the Cisco® Catalyst® WS-C3560X-48PF-E standalone switch? For its 3 security features: Cisco TrustSec, Threat defense and many of the associated advanced security features.
Cisco® Catalyst® WS-C3560X-48PF-E specification list shows its weight as 16.6 pounds or 7.5 kgs while the dimension (H x W x D) is 1.75 x 17.5 x 19.5 inches or 4.45 x 44.5 x 49.5 Centimeters.
The Cisco® Catalyst® WS-C3560X-48PF-E ordering information includes Ethernet PoE+ ports (Standalone 48 10/100/1000), IP Services feature set and 1100W AC power supply 1 RU.
|Product Type||IP Services|
|Total Ethernet Ports||48 PoE+|
|AC Power Supply||1100W|
|Switching Fabric||160 Gbps|
|Forwarding Rate||101.2 mpps|
|Dimensions||1.75 x 17.5 x 19.5|
|Input Current||10-5 A|