Products

WS-C2960XR-48TS-I

Description:  The advance energy management system in the WS-C2960XR-48TS-I enables you to reduce the cost of business by managing energy consumption efficiently. It features a 600MHz dual core CPU together with 128MB of flash memory. It has stacking capabilities for up to 8 switches and has no PoE power available.

Available Now 
Warranty: 1 year Networking-Hardware Warranty Included
Shipping: Worldwide shipping via DHL, UPS, Fedex, and TNT
Repairs: We offer repair service for the WS-C2960XR-48TS-I.
Exchange: Exchange credit for your defective unit available.

Request a Quote

Add more parts to quote
 Rated 5 with 1 reviews

Speak Now

To Speak to a sales representative for pricing & lead time:

Phone

1-919-443-0207

Email

sales@Networking-Hardware.com

About

About WS-C2960XR-48TS-I

Product Overview

Cisco Catalyst WS-C2960XR-48TS-I switches are designed for operational simplicity and the provision of secure and energy efficient business operations. They feature 48 Gigabit Ethernet ports and functional layer 2 and layer 3 features.

 

Power Supply

The Cisco WS-C2960XR-48TS-I switches have an internal power supply running on 250-Watt supply. The operating frequency is 50/z Hz for harmonization of activities and a nominal voltage of 120/130 V AC power. This switch features an optional power redundancy system that can be described as being 1+1, of course, with an optional power supply. System efficiency is likely to be at optimum due to measures in place to check on power consumption levels.

 

Power Capacity

The Cisco WS-C2960XR-48TS-I switch is served by a 250-Watt power supply and has support for FlexStack-Plus and FlexStack-Extended modules.

 

Configurations

The Cisco WS-CS2960XR-48TS-I switch has 4 SFP (Small Form Factor) ports that act as uplink interfaces and no PoE power. There is also support for FlexStack Plus and FlexStack-Extended capabilities. The latter is available in two module configurations, a fiber module and a hybrid module.

 

Stacking

The Cisco WS-C2960XR-48TS-I switch has a stacking limit of 8 in the existing supported modules on display i.e. the FlexStack-Plus and FlexStack-Extended. The two modules have several differences, not just in terms of configurations but also in respective bandwidth limitations. FlexStack-Extended module has stacking bandwidth of 40 Gbps & FlexStack-Plus supports 80 Gbps.

 

Technical Specifications

The Cisco WS-C2960XR-48TS-I switch has a diverse set of tech specs; these are a Flash Memory of 128MB, a dual core 600 MHz, a USB (Type A) flash storage, a DRAM of 512 MB. The Cisco switch can weigh about 6 kilograms or 13.2 pounds.

 

Tech Support and Services

There is a SmartNet service available when purchasing the WS-C2960XR-48TS-I switch. However, the service must be purchased separately.

 

Additional Information

At this time there is no clear-cut end of life/sale (eol/eos) announced. To be able to understand the fine details on the switch, we would encourage you to review the datasheet (pdf). We are sure you will enjoy our services since we offer repairs and up to 70% off the Cisco switch global list price.

specifications

Technical specifications

1.75 x 16.0 x 17.5

128 MB

places switch in very-low power mode during intervals of non-operation

enables single-line Command-Line Interface (CLI)

next gen. for flow visibility technology

-

Yes

Yes

16,000

Up to eight per port

Cisco EtherChannel technology across diverse members of the stack

validate on different VLANs

WS-C2960XR-48TS-I

-5ºC to 45ºC

10BASE-T ports: RJ-45 connectors, 2-pair Category 3, 4, or 5 Unshielded Twisted-Pair (UTP) cabling

90 VAC to 264 VAC

30

4.45 x 40.8 x 44.5

APM86392 600MHz dual core

ports dynamically identify idle periods

a boot server simplifies switch deployment

network metadata held in a DNS server

-

Yes

4000

scheduling

convergence time under 100 milliseconds

security and policy enforcement

2960XR

Up to 3000 m

Per-port status: Link integrity, disabled, activity, speed, and full duplex

1A to 0.5A

44.8

USB (Type-B), Ethernet (RJ-45)

moderate the power consumed via PoE-powered endpoints

all switches are automatically upgraded to new software version

hard-binding with the end device and the interface

-

1250

 congestion avoidance

allow rapid spanning-tree convergence

control admission to the network

Cisco

13.2

Up to 4000 m

CAB-STK-E-0.5M stacking cable with a 0.5 m length

50 Hz to 60 Hz

45

USB (Type-A) for external flash storage

automatically chooses half- or full-duplex transmission mode

automated IOS Software image installation and configuration

4000

up to 256 aggregate

reconvergence for per-VLAN spanning-tree basis

enhances Layer-2 and Layer-3 network access

IP Lite

6

10% to 95% noncondensing

CAB-CONSOLE-RJ45 Console cable 6 ft. with RJ-53

0.046 KVA

44.8

10/100 Mbps Ethernet (RJ-45)

dynamic trunk configuration via all switch ports

automated configuration of switch ports

1250

classification on a per-packet basis

automatically tries to reactivate a link

 enable seamless multipurpose device profiles

4 SFP

10% to 95% noncondensing

  The internal PS is an auto-ranging unit & tolerates input voltages between 100 and 240V AC

108 Gbps

automates the installation of Cisco Fast EtherChannel

automatic configuration of QoS

1000

an external RPS

allows the switch to undergo IOS integrity checks

-

438130

216 Gbps

Ethernet channeling

1000

Port Security Dynamic ARP Inspection & IP Source Guard

48

1023

adjusts transmit & receive pairs if incorrect cable type 

500

controls traffic between hosts in a common segment

80 Gbps

4096

 incorrect fiber-optic wiring detected and disabled

250

solves problems caused by malformed or forged (spoofed) IP

8

9198. bytes.

 maximize memory allocation

1000

enables an IP phone / PC to authenticate on the same switch port

107.1 Mpps

9216. bytes

 minimize broadcasts and maximize bandwidth

500

security & QoS ACEs

216 Gbps

107.1 Mpps

allows VLAN1 to be disabled

allows for network security by encrypting administrator traffic

128 MB

fast client joins and departures of multicast streams

simplifies centralized control of the switch

13.2

 isolate the streams from subscriber VLANs for bandwidth and security

administrators informed of users added to or removed

1.75 x 16.0 x 17.5

prevents faulty end stations

prevents unauthorized users from changing the switch configuration

IP Lite

simplifies telephony installations

avoid mistaken topology loops

supports dynamic VLANs

prevents uncontrolled edge devices from developing Spanning Tree Protocol root nodes.

 administrators remotely check ports via Layer 2 switch

facilitates multicast authentication

simplifies troubleshooting

lowers the price of administering software upgrades

correct and reliable timestamp

MISSPELLINGS

Common misspellings:


Common misspellings:
WS-C296oXR-48TS-I
WS-C2960XR-A8TS-I
WS-C2960XR-4bTS-I
WS-C2960XR-48TS-IX