Rated 5 with 1 reviews

WS-C2960XR-48TD-I

Description:  The C2960XR-48TD-I is another switch from the 2960-XR family of Cisco switches. As indicated by its name, it is a 48-port switch. It does not have any available PoE power. Its measured power consumption is 29.1 W for 0% traffic, 44.7 W for 10% traffic and 45.6 W for full traffic with a weighted average power consumption of 44.8W.

Available Now 

Request a quote for WS-C2960XR-48TD-I
Warranty: 1 year Networking-Hardware Warranty Included
Shipping: Worldwide shipping via DHL, UPS, Fedex, and TNT
Repairs: We offer repair service for the WS-C2960XR-48TD-I.
Exchange: Exchange credit for your defective unit available.

To Speak to a sales representative for pricing & lead time:

Phone

1-800-719-6907

International

919-624-8922


About WS-C2960XR-48TD-I

Product Overview

The WS-C2960XR-48TD-I belongs to the Cisco Catalyst 2960XR series of switches. It is a stackable Gigabit Ethernet switch that has a fixed configuration and provides enterprise-class access for branch and campus applications. It is available at a great discount on our store together with a rack for mounting.

Switch Models and Configurations

The ‘Cisco Catalyst WS-C2960XR-48TD-I’ supports the FlexStack-Plus and FlexStack-Extended capabilities. There is no PoE power available. It uses Cisco IP Lite Software image and contains 24 Ethernet ports as well as 2 SFP+ Uplink Interfaces on the front panel.

Technical Specifications

With a 600 MHz dual core processor you have 128MB Flash Memory available. It has a 10/100 Mbps Ethernet Network management interface with a forwarding bandwidth of 108 Gbps and a switching bandwidth of 216 Gbps. Just like the other switches of the 2960-XR series, there are 9198 bytes Maximum Transmission Unit and 9216 bytes Jumbo-Ethernet frame available.

Mechanical Specifications

The WS-C2960XR-48TD-I weighs about 6.1 kilograms (13.3 pounds) measures 1.75 x 16.0 x 17.5 inches or 4.45 x 40.8 x 44.5 cm in dimensions which is standard for all 2960-XR switches.

Power

This switch has a 250WAC power supply. It works at 90 to 264 VAC at 50 to 60 Hz drawing a current of 6A to 3A. The power rating, which is the switch’s maximum consumption value, stands at 0.047VA. The measured power consumption is as follows: 29.7W for 0% traffic, 44,7W for 10% traffic and 45.6W for 100% traffic with a weighted average power consumption of 44.8.

Power Management

The Cisco 2960-XR switches are amongst the greenest switches around. They use the Switch Hibernation Mode (SHM) for efficient power management resulting in lower energy costs for the operators. The IEEE 802.3az Energy Efficient Ethernet allows it to sense idle periods of operation and switch quickly between interfaces and go into idle mode, thus saving a lot of energy.

Additional Information

We offer anywhere from 50 to 75% off the Cisco list price (gpl). There is also an optional rack mounting kit available with the product. The -C2960XR-48TD-I eol was announced on 31st October 2016 with an eos date of 1st May 2017. Cisco will provide maintenance for the -C2960XR-48TD-I up to 1st May 2018 after which it will discontinue support except in cases of vulnerability or security breaches. Its End of Vulnerability/Security support date is 1st May 2019.

Technical specifications:

Revision Part #

Common misspellings:
WS-C296oXR-48TD-I
WS-C2960XR-A8TD-I
WS-C2960XR-4bTD-I
WS-C2960XR-48TD-IX