Products

WS-C2960XR-24TD-I

Description:  This Cisco catalyst switch is a 24 port stackable switch with 2 SFP+ uplink interfaces. It has a default power supply of 250WAC without any available PoE power. It employs the Cisco IOS IP Lite software image with a power management system that saves energy by switching to idle mode during times of no activity.

Available Now 
Warranty: 1 year Networking-Hardware Warranty Included
Shipping: Worldwide shipping via DHL, UPS, Fedex, and TNT
Repairs: We offer repair service for the WS-C2960XR-24TD-I.
Exchange: Exchange credit for your defective unit available.

Request a Quote

Add more parts to quote
 Rated 5 with 1 reviews

Speak Now

To Speak to a sales representative for pricing & lead time:

Phone

1-919-443-0207

Email

sales@Networking-Hardware.com

About

About WS-C2960XR-24TD-I

Product Overview

The Cisco Catalyst WS-C2960XR-24TD-I is a 24 Gigabit Ethernet port with a rack mountable enclosure. It has a forwarding bandwidth of 108 Gbps and switching bandwidth of 216 Gbps. The WS-C2960XR-24TD-I switch has functional layer 2 and layer 3 features. The switches are well designed to provide scalable and secure intelligent services.

 

Power Supply

The Cisco WS-C2960XR-24TD-I features a dual redundant power supply. The power supplies come with built-in fans that offer cooling to the system. The Cisco Catalyst 2960-XR Series usually have a single power supply by default, thus having an efficient system to cool off using fans ensures system stability and reliability in the long run.

 

Power Capacity

The Cisco WS-C2960XR-24TD-I switch has a PWR-C2-250WAC power supply that is provided by default. There is also a featured stack support for both FlexStack-Plus and FlexStack-Extended modules. It lacks PoE power in the set up.

 

Configurations

The Cisco WS-C2960XR-24TD-I switch has a distinctive configuration set up. It consists of 48 Gigabit Ethernet ports that make utility of 2 SFP+ uplink interfaces. The switch does not have available PoE power and a 250WAC power supply.

 

Stacking

The stack systems employed in the Cisco WS-C2960XR-24TD-I switch are both Flexstack-Plus and Flexstack-Extended modules with stacking limits of 8. There’s however a distinction in that the Flexstack Plus has a stacking bandwidth of 80Gbs whilst the Flexstack-Extended module has stacking bandwidth of 40 Gbps.

 

 

 

Technical Specifications

The Cisco WS-C2960XR-24TD-I switch weighs about 13.6 pounds or 6.2 kilograms. The hardware specs are 512 MB for DRAM, 128 MB Flash memory and IP Lite SKUs, a 600 MHz dual core CPU, A 10/100 Mbps Ethernet, USB (Type B) Ethernet (RJ-45) console port and USB (Type A) flash storage.

 

Tech Support and Services

The Cisco SmartNet Service is available to the WS-C2960XR-24TD-I switch. You need to purchase this as a separate service since it doesn’t come shipped with the switch by default.

 

Additional Information

You can find a more in-depth description of the WS-C2960XR-24TD-I switch by examining our datasheet (pdf) and viewing the user manual (pdf) and installation guide (pdf). We offer up to 70% off the Cisco Switch list price.

specifications

Technical specifications

1.75 x 16.0 x 17.5

128 MB

places switch in very-low power mode during intervals of non-operation

enables single-line Command-Line Interface (CLI)

next gen. for flow visibility technology

-

Yes

Yes

16,000

Up to eight per port

Cisco EtherChannel technology across diverse members of the stack

validate on different VLANs

WS-C2960XR-24TD-I

-5ºC to 45ºC

10BASE-T ports: RJ-45 connectors, 2-pair Category 3, 4, or 5 Unshielded Twisted-Pair (UTP) cabling

90 VAC to 264 VAC

29.3

APM86392 600MHz dual core

ports dynamically identify idle periods

a boot server simplifies switch deployment

network metadata held in a DNS server

-

40G

Yes

4000

scheduling

convergence time under 100 milliseconds

security and policy enforcement

2960XR

4.45 x 40.8 x 44.5

Up to 3000 m

Per-port status: Link integrity, disabled, activity, speed, and full duplex

1A to 0.5A

37.2

USB (Type-B), Ethernet (RJ-45)

moderate the power consumed via PoE-powered endpoints

all switches are automatically upgraded to new software version

hard-binding with the end device and the interface

8

80G

1250

 congestion avoidance

allow rapid spanning-tree convergence

control admission to the network

Cisco

13

Up to 4000 m

CAB-STK-E-0.5M stacking cable with a 0.5 m length

50 Hz to 60 Hz

38.1

USB (Type-A) for external flash storage

automatically chooses half- or full-duplex transmission mode

automated IOS Software image installation and configuration

8

4000

up to 256 aggregate

reconvergence for per-VLAN spanning-tree basis

enhances Layer-2 and Layer-3 network access

IP Lite

5.9

10% to 95% noncondensing

CAB-CONSOLE-RJ45 Console cable 6 ft. with RJ-49

0.039 KVA

37.3

10/100 Mbps Ethernet (RJ-45)

dynamic trunk configuration via all switch ports

automated configuration of switch ports

1250

classification on a per-packet basis

automatically tries to reactivate a link

 enable seamless multipurpose device profiles

2 SFP+

10% to 95% noncondensing

  The internal PS is an auto-ranging unit & tolerates input voltages between 100 and 240V AC

108 Gbps

automates the installation of Cisco Fast EtherChannel

automatic configuration of QoS

1000

an external RPS

allows the switch to undergo IOS integrity checks

-

561890

216 Gbps

Ethernet channeling

1000

Port Security Dynamic ARP Inspection & IP Source Guard

24

1023

adjusts transmit & receive pairs if incorrect cable type 

500

controls traffic between hosts in a common segment

80 Gbps

4096

 incorrect fiber-optic wiring detected and disabled

250

solves problems caused by malformed or forged (spoofed) IP

8

9198. bytes.

 maximize memory allocation

1000

enables an IP phone / PC to authenticate on the same switch port

95.2 Mpps

9216. bytes

 minimize broadcasts and maximize bandwidth

500

security & QoS ACEs

216 Gbps

95.2 Mpps

allows VLAN1 to be disabled

allows for network security by encrypting administrator traffic

128 MB

fast client joins and departures of multicast streams

simplifies centralized control of the switch

13

 isolate the streams from subscriber VLANs for bandwidth and security

administrators informed of users added to or removed

1.75 x 16.0 x 17.5

prevents faulty end stations

prevents unauthorized users from changing the switch configuration

IP Lite

simplifies telephony installations

avoid mistaken topology loops

supports dynamic VLANs

prevents uncontrolled edge devices from developing Spanning Tree Protocol root nodes.

 administrators remotely check ports via Layer 2 switch

facilitates multicast authentication

simplifies troubleshooting

lowers the price of administering software upgrades

correct and reliable timestamp

MISSPELLINGS

Common misspellings:


Common misspellings:
WS-C296oXR-24TD-I
WS-C2960XR-2ATD-I
WS-C2960XR-24TD-IX