Products

WS-C2960X-48LPD-L

Description:  The Cisco Catalyst 2960X-48LPD-L is a stackable switch with fixed configurations. It has POE+ power and two 10G SFP+ uplink interfaces. The switch is LAN base and layer 2 stackable.

Available Now 
Warranty: 1 year Networking-Hardware Warranty Included
Shipping: Worldwide shipping via DHL, UPS, Fedex, and TNT
Repairs: We offer repair service for the WS-C2960X-48LPD-L.
Exchange: Exchange credit for your defective unit available.

Request a Quote

Add more parts to quote
 Rated 5 with 1 reviews

Speak Now

To Speak to a sales representative for pricing & lead time:

Phone

1-919-443-0207

Email

sales@Networking-Hardware.com

About

About WS-C2960X-48LPD-L

Product Overview:

The Cisco Catalyst C2960X-48LPD-L Switches have a fixed configuration with 48 Gigabit Ethernet ports. Operating on Cisco IOS, they are stackable using FlexStack-Plus and FlexStack-Extended. They also support layer 3 routing features and support PoE+.

Power Supply:

The Cisco Catalyst C2960X-48LPD-L has an optional redundant external power supply (RPS) as an add-on along with the fixed main power supply of 640WAC.

Power Capacity:

Cisco Catalyst 2960X-48LPD-L supports a maximum of 12 PoE+ ports with up to 30W or 24 PoE+ ports with up to 15.4W. The total available PoE Power is 370W.

Configuration:

Cisco Catalyst 2960X-48LPD-L has 48 Gigabit Ethernet Ports along with 2 fixed 10 Gigabit Ethernet SFP+ uplink interfaces.

The switches are configured with LAN base Cisco IOS Software image.

Stacking:

The switches support FlexStack-Plus and FlexStack-Extended. FlexStack-Plus offers to stack up to 8 stack switches. Yhe FlexStack-Plus module is an optional feature, which is hot-swappable with other 2960 catalyst switches. FlexStack-Plus allows a stacking bandwidth of 80 Gbps. Cisco FlexStack-Extended allows 40 Gbps bandwidth while supporting long-distance stacking option. Stacking cables available in 0.5, 1 or 3 Meters length, are required to use the FlexStack features of the stacking modules.

Layer 3:

The switch allows IP unicast routing protocols such as EIGRP, RIPng and OSPF, for load balancing and scaling the LANs.Protocol Independent Multicast (PIM) for IP multicast is also supported. Hot Standby Routing Protocol (HSRP) and Virtual Router Redundancy Protocol (VRRP) can be configured to provide redundancy during failovers and allow dynamic load balancing.

Security:

The switch provides security with 802.1X authentication, Access Control Lists (ACLs), private VLANs, Serial Port Analyzer (SPAN) and Bridge Protocol Data Unit (BPDU) Guard.

Tech Specs:

Cisco Catalyst 2960X-48LPD-L has a flash memory of 128 MB, a DRAM of 512 MB and a CPU of 600 MHz dual core. It has a forwarding Bandwidth of 108 Gbps and switching bandwidth of 216 Gbps with full duplex capacity.The forwarding rate of the 64 byte Layer 3 packet is 130.9 Mpps. The rack mountable unit has dimensions of 1.75 x 14.5 x 17.5 Inches (H x D x W) and a weight of 12.9 pounds. The weighted average power consumption is 61.2

Tech Support and Services:

The Cisco SmartNet Service is available to the WS-C2960X-48LPD-L but must be purchased separately.

Additional Info:

The WS-C2960X-48FPD-L has a release date of March 7, 2014 with the end of life/sale (eol/eos) that is not yet announced. The WS-C2960X-48LPD-L is factory reset compatible via the mode key and has a default username, password and internet protocol (IP). For more a more in-depth description on this product and its specs please view our cisco catalyst 2960-x datasheet (pdf) and our Cisco catalyst 2960x configuration guide/manual (pdf).

specifications

Technical specifications

WS-C2960X-48LPD-L

validate on different VLANs

Cisco EtherChannel technology across diverse members of the stack

Up to eight per port

16,000

Yes

Yes

12 ports up to 30W

next gen. for flow visibility technology

enables single-line Command-Line Interface (CLI)

places switch in very-low power mode during intervals of non-operation

128 MB

1.75 x 14.5 x 17.5

-5¬ļC to 45¬ļC

10BASE-T ports: RJ-45 connectors, 2-pair Category 3, 4, or 5 Unshielded Twisted-Pair (UTP) cabling

101 to 240 VAC

45.7

2960X

security and policy enforcement

convergence time under 100 milliseconds

scheduling

2000

Yes

40G

24 ports up to 15.4W

network metadata held in a DNS server

a boot server simplifies switch deployment

ports dynamically identify idle periods

512 MB

4.5 x 36.8 x 44.5

Up to 3000 m

Per-port status: Link integrity, disabled, activity, speed, and full duplex

51 to 60 Hz

61.1

Cisco

control admission to the network

allow rapid spanning-tree convergence

 congestion avoidance

1000

80G

8

370W

hard-binding with the end device and the interface

all switches are automatically upgraded to new software version

moderate the power consumed via PoE-powered endpoints

APM86392 600MHz dual core

12.9 lb

Up to 4000 m

CAB-STK-E-0.5M stacking cable with a 0.5 m length

5A-2A

62

LAN Base

enhances Layer-2 and Layer-3 network access

reconvergence for per-VLAN spanning-tree basis

up to 256 aggregate

2000

8

automated IOS Software image installation and configuration

automatically chooses half- or full-duplex transmission mode

USB (Type-B), Ethernet (RJ-45)

5.8 Kg

10% to 95% noncondensing

CAB-CONSOLE-RJ45 Console cable 6 ft. with RJ-46

0.48 kVA

61.2

2 SFP+

 enable seamless multipurpose device profiles

automatically tries to reactivate a link

classification on a per-packet basis

1000

automated configuration of switch ports

dynamic trunk configuration via all switch ports

USB (Type-A) for external flash storage

10% to 95% noncondensing

  The internal PS is an auto-ranging unit & tolerates input voltages between 100 and 240V AC

4A

370W

allows the switch to undergo IOS integrity checks

an external RPS

1000

automatic configuration of QoS

automates the installation of Cisco Fast EtherChannel

10/100 Mbps Ethernet (RJ-45)

8A

48

Port Security Dynamic ARP Inspection & IP Source Guard

1000

Ethernet channeling

50. Gbps

80G

controls traffic between hosts in a common segment

500

adjusts transmit & receive pairs if incorrect cable type 

100Gbps

8

solves problems caused by malformed or forged (spoofed) IP

500

 incorrect fiber-optic wiring detected and disabled

64

130.9 Mpps

enables an IP phone / PC to authenticate on the same switch port

600

 maximize memory allocation

4096

100Gbps

security & QoS ACEs

600

 minimize broadcasts and maximize bandwidth

9198. bytes.

512 MB

allows for network security by encrypting administrator traffic

allows VLAN1 to be disabled

9216. bytes

128 MB

simplifies centralized control of the switch

fast client joins and departures of multicast streams

130.9 Mpps

12.9 lb

administrators informed of users added to or removed

 isolate the streams from subscriber VLANs for bandwidth and security

1.75 x 14.5 x 17.5

prevents unauthorized users from changing the switch configuration

prevents faulty end stations

Cisco ONE Software

avoid mistaken topology loops

simplifies telephony installations

prevents uncontrolled edge devices from developing Spanning Tree Protocol root nodes.

supports dynamic VLANs

facilitates multicast authentication

 administrators remotely check ports via Layer 2 switch

simplifies troubleshooting

lowers the price of administering software upgrades

correct and reliable timestamp

MISSPELLINGS

Common misspellings:


Common misspellings:
WS-C296oX-48LPD-L
WS-C2960X-A8LPD-L
WS-C2960X-4bLPD-L
WS-C2960X-481PD-L
WS-C2960X-48LPD-1
WS-C2960X-48LPD-LX