Products

WS-C2960X-24TD-L

Description:  The Cisco Catalyst 2960X-24-TD-L is a fixed-configured switch with 24 ethernet ports which supports LAN base layer 3 features. It has 24 ports and has two Form-Factor Pluggable Plus uplink interfaces. It is also flex-stack plus and extended enabled.

Available Now 
Warranty: 1 year Networking-Hardware Warranty Included
Shipping: Worldwide shipping via DHL, UPS, Fedex, and TNT
Repairs: We offer repair service for the WS-C2960X-24TD-L.
Exchange: Exchange credit for your defective unit available.

Request a Quote

Add more parts to quote
 Rated 5 with 1 reviews

Speak Now

To Speak to a sales representative for pricing & lead time:

Phone

1-919-443-0207

Email

sales@Networking-Hardware.com

About

About WS-C2960X-24TD-L

Product Overview

Cisco catalyst WS-C2960X-24TD-L series is equipped with 24 Ethernet setup along with 2 * 10G SFP+ uplink interfaces which provide a stack bandwidth of up to 80G. Along with easy device configuration and troubleshooting, the switch now features FlexStack-Plus and FlexStack-Extended capability operating over the LAN Base Cisco IOS Software. With better scalability and network reliability, WS-C2960X-24TD-L switch can be completely configured with the support of layer 3 and PoE+ as well.

Power Supply

The Cisco WS-C2960X-24TD-L supports both External and Dual redundant power supplies. Although the packaging only includes one fixed power supply, but the second power source can be purchased as a spare to ensure proper backup.

Power Capacity

As the switch is designed for mid-market and fresh level business, power input is managed through redundant Power System (RPS) connecter which requires a minimum power consumption frequency of 50/60 Hz along with a nominal voltage of AC 120/230 V to operate normally.

Configurations

WS-C2960X-24TD-L catalyst switch features 24 Ethernet ports which are operated through LAN Base Cisco IOS Software image. As it supports 2SFP+ uplink interfaces and SFP compatibility, users can also update the system software for better performance. For installation details, configuration guide for the respective switch model can be consulted which also contain firmware updates.

Stacking

The switch offers stackable capacity which supports up to 8 switches stacking for which users can select any one from FlexStack-Plus and FlexStack Extented. Once connected to a stack, the device will automatically upgrate to the stack’s Cisco IOS Software version to avoid any vulnerabilities. FlexStack-Plus offers 80Gbps Stack bandwidth along with a stack limit of 8 whereas the FlexStack Extended supports 40Gbps Stack bandwidth which has a stack limit fixed to 8.

Tech Specifications

Cisco WS-C2960X-24TD-L catalyst switch is designed to deliver high end performance and reliability for networking purposes. Equipped with a 512 RAM and 128MB of flash memory, the switch delivers 95.2Mpps forwarding performance along with a switching bandwidth of 216Gbps. Moreover, the rack mountable has dimensions set to 44.5cm x 27.9cm x 4.45cm along with a total package weight of 9.19kg.

Tech Support and Services

To gain extended support and services for the Cisco Catalyst WS-C2960X-24TD-L switch, users need to purchase Cisco SmartNet service separately.

Important Information

Cisco catalyst WS-C2960X-24TD-L is launched with limited lifetime warranty for which End of life (EOL) and End of sale (EOS) dates are yet to be announced. For detailed description, installation guide and warranty details, customers can also download datasheet pdf from our website. For the benefit of our valued customers, we are now delivering WS-C2960X-24TD-L catalyst switch 50% off as of the original Cisco price list. Along with a one-year manufacturer’s warranty, extended services and support can now be acquired at minimum rates.

specifications

Technical specifications

WS-C2960X-24TD-L

128 MB

validate on different VLANs

Cisco EtherChannel technology across diverse members of the stack

Up to eight per port

16,000

Yes

Yes

370W

next gen. for flow visibility technology

enables single-line Command-Line Interface (CLI)

places switch in very-low power mode during intervals of non-operation

128 MB

1.75 x 11.0 x 17.5

-5ºC to 45ºC

10BASE-T ports: RJ-45 connectors, 2-pair Category 3, 4, or 5 Unshielded Twisted-Pair (UTP) cabling

104 to 240 VAC

24.9

2960X

512 MB

security and policy enforcement

convergence time under 100 milliseconds

scheduling

2000

Yes

40G

40G

network metadata held in a DNS server

a boot server simplifies switch deployment

ports dynamically identify idle periods

512 MB

4.5 x 27.9 x 44.5

Up to 3000 m

Per-port status: Link integrity, disabled, activity, speed, and full duplex

54 to 60 Hz

32.2

Cisco

control admission to the network

allow rapid spanning-tree convergence

 congestion avoidance

1000

8

hard-binding with the end device and the interface

all switches are automatically upgraded to new software version

moderate the power consumed via PoE-powered endpoints

APM86392 600MHz dual core

8.9 lb

Up to 4000 m

CAB-STK-E-0.5M stacking cable with a 0.5 m length

1A to 0.5A

33.1

LAN Base

enhances Layer-2 and Layer-3 network access

reconvergence for per-VLAN spanning-tree basis

up to 256 aggregate

2000

8

automated IOS Software image installation and configuration

automatically chooses half- or full-duplex transmission mode

USB (Type-B), Ethernet (RJ-45)

4.0 Kg

10% to 95% noncondensing

CAB-CONSOLE-RJ45 Console cable 6 ft. with RJ-49

0.034 kVA

32.3

2 SFP+

 enable seamless multipurpose device profiles

automatically tries to reactivate a link

classification on a per-packet basis

1000

automated configuration of switch ports

dynamic trunk configuration via all switch ports

USB (Type-A) for external flash storage

10% to 95% noncondensing

  The internal PS is an auto-ranging unit & tolerates input voltages between 100 and 240V AC

3A

370W

allows the switch to undergo IOS integrity checks

an external RPS

1000

automatic configuration of QoS

automates the installation of Cisco Fast EtherChannel

10/100 Mbps Ethernet (RJ-45)

569520

N/A

24

Port Security Dynamic ARP Inspection & IP Source Guard

1000

Ethernet channeling

50. Gbps

80G

controls traffic between hosts in a common segment

500

adjusts transmit & receive pairs if incorrect cable type 

100Gbps

8

solves problems caused by malformed or forged (spoofed) IP

500

 incorrect fiber-optic wiring detected and disabled

64

95.2 Mpps

enables an IP phone / PC to authenticate on the same switch port

600

 maximize memory allocation

4096

100Gbps

security & QoS ACEs

600

 minimize broadcasts and maximize bandwidth

9198. bytes.

allows for network security by encrypting administrator traffic

allows VLAN1 to be disabled

9216. bytes

simplifies centralized control of the switch

fast client joins and departures of multicast streams

95.2 Mpps

8.9 lb

administrators informed of users added to or removed

 isolate the streams from subscriber VLANs for bandwidth and security

1.75 x 11.0 x 17.5

prevents unauthorized users from changing the switch configuration

prevents faulty end stations

Cisco ONE Software

avoid mistaken topology loops

simplifies telephony installations

prevents uncontrolled edge devices from developing Spanning Tree Protocol root nodes.

supports dynamic VLANs

facilitates multicast authentication

 administrators remotely check ports via Layer 2 switch

simplifies troubleshooting

lowers the price of administering software upgrades

correct and reliable timestamp

MISSPELLINGS

Common misspellings:


Common misspellings:
WS-C296oX-24TD-L
WS-C2960X-2ATD-L
WS-C2960X-24TD-1
WS-C2960X-24TD-LX