Products

WS-C2960X-24PSQ-L

Description:  The Cisco Catalyst 2960X-24PSQ-L is a stackable (flex-stack plus and flex-stack extended) and fixed configured switch with 24 ethernet interfaces. It features a layer 3 cisco IOS software image LAN base and has 110 Watts of available PoE power.

Available Now 
Warranty: 1 year Networking-Hardware Warranty Included
Shipping: Worldwide shipping via DHL, UPS, Fedex, and TNT
Repairs: We offer repair service for the WS-C2960X-24PSQ-L.
Exchange: Exchange credit for your defective unit available.

Request a Quote

Add more parts to quote
 Rated 5 with 1 reviews

Speak Now

To Speak to a sales representative for pricing & lead time:

Phone

1-919-443-0207

Email

sales@Networking-Hardware.com

About

About WS-C2960X-24PSQ-L

Product Overview

WS-C2960X-24PSQ-L is a Cisco Catalyst 2960 series switch with a fixed configuration module. The WS-C2960X-24PSQ-L has 24 switch ports (10 Gig), 2 uplinks (SFP) modules and 2 Gigabit Ethernet ports. The device is capable of providing electricity to other LAN devices using PoE (Power over Ethernet). The switch runs on a LAN Based IOS software.

Power Consumption

The input Voltage for the switch is 100 to 240 VAC, the input current in 2 to 4 Amperes with 50 to 60 Hertz of frequency. The maximum power consumption of power for WS-C2960X-24PSQ-L is 0.16 kVA. The power consumed by the switch during 0% and 100% traffic throughput are 28.5 watts and 34.8 Watts respectively.

WS-C2960X-24PSQ-L has 110W of power at its disposal for using the PoE (IEEE 802.3af and IEEE 802.3at) feature. There are 8 PoE ports on the device.The PoE features enables the switch ports to conduct electricity through Ethernet cables for powering common LAN devices such as IP phones, Wireless access points. The features cuts the costs for the installation of new electric circuits for those LAN devices and reduces overall power consumption. Up to 3 ports with 30 watts power can be used with PoE+ technology and 7 ports with 15.4 watts of power can be used for powering devices with PoE technology.

Software

WS-C2960X-24PSQ-L is capable of routing and forwarding layer 3 traffic. The Layer 3 forwarding rate of a 64 byte packet is 71.4 Mpps. The IPv4 and IPv6 unicast routing protocols can be configured in the switch. Even multicast traffic can flow through the switch.

Hardware Specifications

128 MB data storage is available for the flash memory in WS-C2960X-24PSQ-LCPU is dual core with 600Mhz. The console port is available as a USB (type B) or Ethernet (RJ 45). The storage interface uses an USB type A port for connecting an external flash storage.

Performance  

A maximum of 4096 VLAN IDs are available on WS-C2960X-24PSQ-LCPU. The maximum number of active VLANs is 1023. The forwarding bandwidth and the switching bandwidth at full duplex capacity is 108 Gpps and 216 Gpps respectively. The MTBF (Mean Time between Failures) is 462,680 hours.

Operational Simplicity

DHCP configuration in the switch can be automated in the switch which simplifies deployment. The LACP and PAgP protocols makes the Ether Channel deployments easily. UDLD (Unidirectional Link failure) detects the failures on the optic fiber cables (unidirectional) and the ports associated with such cables. Voice VLAN makes deploying telephony network easy and keeps the Voice data separate which also makes administration and troubleshooting simpler.

Technical Support

Configuration guide from Cisco can be helpful and has detailed instructions for switch configuration. For advanced switch specific features, please refer to the datasheet pdf available below. The SmartNet contract with Cisco be purchased for prioritized support from Cisco.

The End of life or End of Support (EOL/EOS) date is not announced for the WS-C2960X-24PSQ-LCPU model switch. We can offer up to 50% discount from the price offered by Cisco directly and up to 1 year warranty on most devices.

specifications

Technical specifications

WS-C2960X-24PSQ-L

validate on different VLANs

Cisco EtherChannel technology across diverse members of the stack

Up to eight per port

16,000

Yes

Yes

3 ports up to 30W

next gen. for flow visibility technology

enables single-line Command-Line Interface (CLI)

places switch in very-low power mode during intervals of non-operation

128 MB

1.73 x 11.03 x 17.5

-5¬ļC to 45¬ļC

10BASE-T ports: RJ-45 connectors, 2-pair Category 3, 4, or 5 Unshielded Twisted-Pair (UTP) cabling

108 to 240 VAC

28.5

2960X

security and policy enforcement

convergence time under 100 milliseconds

scheduling

2000

Yes

7 ports up to 15.4W

network metadata held in a DNS server

a boot server simplifies switch deployment

ports dynamically identify idle periods

512 MB

4.45 x 28.0 x 44.5

Up to 3000 m

Per-port status: Link integrity, disabled, activity, speed, and full duplex

58 to 60 Hz

32.8

Cisco

control admission to the network

allow rapid spanning-tree convergence

 congestion avoidance

1000

110W

hard-binding with the end device and the interface

all switches are automatically upgraded to new software version

moderate the power consumed via PoE-powered endpoints

APM86392 600MHz dual core

12.8 lb

Up to 4000 m

CAB-STK-E-0.5M stacking cable with a 0.5 m length

2A - 4A

34.8

LAN Base

enhances Layer-2 and Layer-3 network access

reconvergence for per-VLAN spanning-tree basis

up to 256 aggregate

2000

automated IOS Software image installation and configuration

automatically chooses half- or full-duplex transmission mode

USB (Type-B), Ethernet (RJ-45)

5.8 kg

10% to 95% noncondensing

CAB-CONSOLE-RJ45 Console cable 6 ft. with RJ-53

0.16 kVA

33

2 SFP, 2 10/100/1000BT

 enable seamless multipurpose device profiles

automatically tries to reactivate a link

classification on a per-packet basis

1000

automated configuration of switch ports

dynamic trunk configuration via all switch ports

USB (Type-A) for external flash storage

10% to 95% noncondensing

  The internal PS is an auto-ranging unit & tolerates input voltages between 100 and 240V AC

N/A

110W

allows the switch to undergo IOS integrity checks

an external RPS

1000

automatic configuration of QoS

automates the installation of Cisco Fast EtherChannel

10/100 Mbps Ethernet (RJ-45)

462680

N/A

24 (8 PoE)

Port Security Dynamic ARP Inspection & IP Source Guard

1000

Ethernet channeling

50. Gbps

71.4 Mpps

controls traffic between hosts in a common segment

500

adjusts transmit & receive pairs if incorrect cable type 

100Gbps

100Gbps

solves problems caused by malformed or forged (spoofed) IP

500

 incorrect fiber-optic wiring detected and disabled

64

512 MB

enables an IP phone / PC to authenticate on the same switch port

600

 maximize memory allocation

4096

128 MB

security & QoS ACEs

600

 minimize broadcasts and maximize bandwidth

9198. bytes.

12.8 lb

allows for network security by encrypting administrator traffic

allows VLAN1 to be disabled

9216. bytes

1.73 x 11.03 x 17.5

simplifies centralized control of the switch

fast client joins and departures of multicast streams

71.4 Mpps

Cisco ONE Software

administrators informed of users added to or removed

 isolate the streams from subscriber VLANs for bandwidth and security

prevents unauthorized users from changing the switch configuration

prevents faulty end stations

avoid mistaken topology loops

simplifies telephony installations

prevents uncontrolled edge devices from developing Spanning Tree Protocol root nodes.

supports dynamic VLANs

facilitates multicast authentication

 administrators remotely check ports via Layer 2 switch

simplifies troubleshooting

lowers the price of administering software upgrades

correct and reliable timestamp

MISSPELLINGS

Common misspellings:


Common misspellings:
WS-C296oX-24PSQ-L
WS-C2960X-2APSQ-L
WS-C2960X-24PSQ-1
WS-C2960X-24PSQ-LX